Saturday, September 14, 2019

English Assessment Essay

? Controlled Assessment is a new form of internal assessment. Following a coursework review by QCA, Controlled Assessment has been introduced as part of nearly all new GCSEs, to replace coursework. High, medium or limited control levels are set for each of the Controlled Assessment processes: task setting, task taking and task marking. For each stage, the level of control will ensure reliability and authenticity, and make assessments more manageable for teachers and candidates. Weighting of Controlled Assessments is defined by QCA subject criteria and, depending on the subject, will be  25% or 60% of the total assessment. 1. 2 What does ‘control’ actually mean? QCA has produced a Glossary of terms for Controlled Assessment regulations. The levels of controls are defined as follows: ? Formal supervision (High level of control) – the candidate must be in direct sight of the supervisor at all times. Use of resources and interaction with other candidates is tightly prescribed. Informal supervision (Medium level of control) – questions/tasks are outlined, the use of resources is not tightly prescribed and assessable outcomes may be informed by group work. Supervision is confined to (i) ensuring that the contributions of individual candidates are recorded accurately, and (ii) ensuring that plagiarism does not take place. The supervisor may provide limited guidance to candidates. Limited supervision (Limited level of control) – requirements are clearly specified, but some work may be completed without direct supervision and will not contribute directly to assessable outcomes. ? ? 1. 3 What is the purpose of this Guide? This Guide provides detailed information for teachers about how to manage Controlled Assessment: some of the information applies to all GCSE subjects and some information provides subject specific guidance. It is important to make the point that this Guide plays a secondary role to the Specification itself. The Specification is the document on which assessment is based and specifies what content and skills need to be covered in delivering the course. At all times,  © OCR 2009 Guide to Controlled Assessment in GCSE Applied Business 3. therefore, this teacher support should be read in conjunction with the Specification. If clarification on a particular point is sought then that clarification should be found in the Specification itself. Teaching of this qualification will vary greatly from school to school and from teacher to teacher. With that in mind, this Guide is offered as guidance but may be subject to modifications by the individual teacher. 4  © OCR 2009 Guide to Controlled Assessment in GCSE Applied Business 2 Summary of the Controlled Assessment units Unit A242: Making your mark in business. This unit represents 60% of the total GCSE (Single Award) marks and 30% of the total GCSE (Double Award) marks. It has a maximum of 60 marks. Candidates will choose one business scenario from a selection of five. They then choose a local business on which to base their subsequent research and complete all the tasks. This unit is internally assessed, applying the principles of Controlled Assessment. Controls are set within the assessment in each of the stages of the assessment process: Task setting: high level of control in relation to the setting of tasks. Task taking: this stage is divided into 2 different stages, each with a different level of control: – Research/data collection: limited level of control – Analysis and evaluation: high level of control Task marking: medium level of control. More information about each stage of the process is provided in the following sections of this Guide. Unit A244: Business and you This unit represents 60% of the total GCSE (Single Award) marks and 30% of the total GCSE (Double Award) marks. It has a maximum of 60 marks. Candidates will choose one job role from a selection of five and investigate a range of human resource activities in relation to this role. This unit is internally assessed, applying the principles of Controlled Assessment. Controls are set within the assessment in each of the stages of the assessment process: Task setting: high level of control in relation to the setting of tasks. Task taking: this stage is divided into 2 different stages, each with a different level of control: – Research/data collection: limited level of control – Analysis and evaluation: high level of control Task marking: medium level of control. More information about each stage of the process is provided in the following sections of this Guide.  © OCR 2009 Guide to Controlled Assessment in GCSE Applied Business 5 3 Teacher guidance on how to plan Controlled Assessment 3. 1 Controlled Assessment delivery flow chart Timetabled Lessons OCR set tasks for centres Unit A242 Making your mark in business Task 1: Get prepared 2 hours Teacher Guidance/ Feedback Candidates Work in Progress Task induction Task research Task 2: Research Up to 30 hours Task 3: Consider your results 5 hours Task 4: Attract customers 6 hours Candidates Work in Progress Review outcomes of research. Task 5: Reflect on outcome 2 hours Unit A244 Business and you Task 1: Research Up to 30 hours Candidates Produce Outcome for Assessment Task completion Task authentication Task 2: Apply for the post 5 hours Task 3: Getting selected 5 hours Task 4: Best practice – induction 2 hours Evaluation/ Review Task 5: A promotional opportunity 3 hours Teacher Assessment and Submission to OCR for Moderation by specified deadlines Submission of marks: January series: 10 January June series: 15 May 6  © OCR 2009 Guide to Controlled Assessment in GCSE Applied Business 3. 2 Guidance on the release of Controlled Assessment tasks to candidates 3. 2. 1 Choice of Controlled Assessment task For these GCSEs in Applied Business, OCR will assume a high level of control with regard to task setting. A number of scenarios will be available from OCR for the Controlled Assessment units. Once a scenario has been chosen, then the candidate will carry out necessary research in order to respond to a series of tasks. These tasks have been designed to meet the full assessment requirements of the unit. It is important that before candidates begin the assessment, they are equipped with the necessary knowledge, understanding and skills specified in each of the unit specifications for Units A242 and A244. Unit A242 – The candidate must choose one business scenario from a list of five and then choose a local business on which to base their subsequent investigations. The series of tasks which the candidate must complete are supplied by OCR. It should be noted that the types of business scenario have been chosen to be as wide ranging as possible to suit all centre requirements. Unit A244 – The candidate must choose one job role scenario from a list of five and investigate a range of human resource activities in relation to this role. The series of tasks which the candidate must complete are supplied by OCR. It should be noted that the types of job role scenarios have been chosen to be as wide ranging as possible to suit all centre requirements. Further guidance on how to choose a scenario for the Controlled Assessment will be provided within the Controlled Assessment scenario. Live OCR Controlled Assessment material must NOT be used as practice material. Centres should devise their own practice material or use the specimen Controlled Assessment material. 3. 2.2 When and how to give Controlled Assessment tasks to candidates Controlled Assessment tasks will be available from Interchange from 1 June 2009. Centres must be aware that live Controlled Assessment material will be reviewed on a regular basis to ensure to ensure that it continues to be fit for purpose. Should it be necessary to amend or revise the material then centres will be notified. Centres should refer to the sample scheme of work and lesson plans which are available to download from OCR’s website to assist planning and delivery of the Controlled Assessment units and its assessments.  © OCR 2009 Guide to Controlled Assessment in GCSE Applied Business 7 3. 3 Guidance on research/data collection There must be a medium level of supervision when candidates complete the research/data collection element of these units. Candidates may need access to the internet; library, textbooks, and/or optional visits to local businesses. This research element can be carried out as part of a group or individually as outlined in the specification. (a) Authenticity control: Candidate can complete the research individually or in a group without direct teacher supervision. In Unit A242, each candidate MUST carry out both individual and group research. The write up of findings and responding to tasks must be completed individually and under direct supervision. The teacher must be able to authenticate the work. (b) Feedback control: Feedback to the candidate will be permissible but tightly defined. Within these specifications, OCR expects teachers to equip candidates with the knowledge, understanding and skills which they will need before they respond to the tasks. It should be remembered that candidates are required to reach their own judgements and conclusions without any guidance or assistance from others. When supervising tasks, teachers are expected to: Exercise continuing supervision of work in order to monitor progress and to prevent plagiarism Exercise continuing supervision of practical work to ensure essential compliance with Health and Safety requirements Ensure that the work is completed in accordance with the specification requirements and can be assessed in accordance with the specified marking criteria and procedures. (c) Time control: The overall time limits available to the candidate to complete the Controlled Assessments are specified in Sections 4. 1 and 4. 2 of these specifications. A more detailed breakdown of time limits for particular tasks is contained in the specimen Controlled Assessment material for Units A242 and A244. Tasks should be completed within the time limits set, and be supervised and marked by the teacher. Some of the work, by its very nature, may be undertaken outside the centre, eg research work. The use and application of the research material will be undertaken under direct teacher supervision. With all internally assessed work, the teacher must be satisfied that the work submitted for assessment is the candidate’s own work and be able to authenticate it using the specified procedure in Section 5. 4. 4 of these specifications. (d) Collaboration control: Group work is permissible in some cases for the research phase of the units. However, each candidate must respond to the tasks individually. Where group work is suggested as an alternative to individual work, candidates will still be analysing the outcome of the group work on an individual basis before forming their own conclusions. (e) Resource control: Access to resources will be limited to those appropriate to the task and as required by the unit. Candidates will need to be provided with the most appropriate materials and equipment to allow them full access to the marking criteria but this must be closely monitored and supervised, especially the level of ICT access. During the write up (Unit A242 Tasks 3, 4 and 5 and Unit A244 Tasks 2, 3, 4 and 5) candidates should only have access to their research which they have made during the research phase of task taking (Unit A242 Task 2 and Unit A244 Task 1). Generating and reviewing the action plan should be done in the specific time allocated for the completion of this task and should not form part of the write-up phase. It is the responsibility of the 8  © OCR 2009 Guide to Controlled Assessment in GCSE Applied Business centre to ensure that these are only research and that they do not include a draft or final version of the tasks 3. 4 Guidance on the production of the outcome 3. 4. 1 Controls for the production of the outcome Teachers must keep live Controlled Assessment tasks secure and confidential at all times whilst in their possession. For example, candidates may collect the results of any research or investigations undertaken in a research folder which must be handed in to the teacher before the writing up sessions begin. In such circumstances, it is the responsibility of the teacher to keep the research folders secure between the writing up sessions and that candidates do not have access to these folders outside of the allotted sessions. There must be a high level of supervision when candidates complete the Controlled Assessment tasks for these units. Although candidates will  have access to their research notes, they must work individually and be supervised at all times. Analysis and evaluation of findings – high control When candidates analyse and evaluate their findings as they address each of the Controlled Assessment tasks (excluding the research tasks, which carry no marks), they must be supervised at all times and work individually. Completing the tasks The candidate will be provided with sufficient time to complete all of the tasks. It is suggested that evidence is produced in a number of sessions, each focusing on a specific mini-task. Each candidate must produce individual and authentic evidence for each of the (mini) tasks. It is particularly important that those candidates who conducted research as part of the group still produce individual evidence. The teacher may give appropriate support and guidance to the candidates during the research phase of these units but not during the write-up phase. This support and guidance should focus on checking that the candidates understand what is expected of them. It is not acceptable for the teacher to provide model responses or to work through answers in detail. The candidate will have the opportunity to use information from a wide range of resources as part of their research time in Units A242 and A244. This research will help them to produce evidence which is clearly targeted to meeting the assessment requirements of each of the remaining tasks. It is not permissible, however, for candidates to introduce any new material into their evidence that is not accessed during this research time, and teachers must safeguard against this. Candidates must also be guided on the use of information to ensure that confidentiality and intellectual property rights are maintained at all times. It is essential that any material directly used from a source is appropriately and rigorously referenced. In both Units A242 and A244, candidates  © OCR 2009 Guide to Controlled Assessment in GCSE Applied Business 9 will be asked to complete a bibliography during their research time which will be required for review at the point of internal assessment and external moderation. 3. 4. 2 Controlled Assessment task security It is the responsibility of the centre to ensure that downloaded Controlled Assessment Tasks and candidates’ scripts are stored securely. Any breach in security must be reported to OCR as soon a possible by submitting a written report (a blank report form is available on Interchange) from Head of Centre to the OCR Quality and Standards Division detailing the circumstances, the candidates concerned and any action taken. Candidates’ scripts for all completed Controlled Assessment tasks must be stored securely and they should be available for moderation. It is suggested that they are destroyed after the last date for Enquiries about Results following the examination series in which entries for the units concerned are made. Candidate absence at the time of assessment If a candidate is absent from a centre when an assessment is carried out, the Controlled Assessment task may be set at an alternative time provided that the centre is satisfied that security has been maintained by keeping all materials secure. Unexpected circumstances If an unexpected problem (such as a fire alarm or other circumstances beyond the teachers’ control) occurs while a Controlled Assessment task is taking place, the task may be resumed subsequently provided the teacher ensures that no candidate is likely to have been advantaged or disadvantaged by doing so. 3. 4.3 Presentation of work Candidates must observe certain procedures in the production of Controlled Assessments. ? charts, graphs, images and tables may be produced using appropriate ICT. These should be inserted into the candidate’s evidence at the appropriate place any copied material must be suitably acknowledged quotations must be clearly marked and a reference provided wherever possible work submitted for moderation or marking must be marked with the: – centre number – centre name – candidate number – candidate name – unit code and title. ? ? ? 10  © OCR 2009 Guide to Controlled Assessment in GCSE Applied Business Work submitted on paper for moderation or marking must be secured by treasury tags. Work submitted in digital format (CD or online) must be in a suitable file structure as shown in Appendix B of the Specification.  © OCR 2009 Guide to Controlled Assessment in GCSE Applied Business 11 4 Controlled Assessment candidate guidelines 4. 1 Task setting For this subject OCR will provide a list of tasks. 4. 2 Task taking 4. 2. 1 What can I do in relation to research, drafting and re-drafting? Your teacher will discuss the tasks on offer and the proposed areas of enquiry and the resources available. An induction period into the research methods, sourcing and the use of equipment may also take place. Time constraints and a programme should be adopted and this will be explained by your teacher. Your research and planning may involve interviews, fieldwork, visits, library research, internet research or questionnaires. You should keep a record of the sources you have consulted at this stage and this will form part of your portfolio. You should provide a plan of action to the teacher which can be discussed. You teacher will inform you what materials are appropriate and inappropriate. Your draft piece will be discussed with your teacher and they may offer advice, answer any questions and give feedback. Throughout this process your teacher will supervise to ensure there is no plagiarism and will ensure all your work is within the Health and Safety requirements and that all candidates work is in accordance with the Controlled Assessment regulations. At no stage will model answers be provided. You should reach your own conclusions and make your own judgements and any teacher support will be recorded. You may be given opportunity to edit, check redraft and reorganise your work. During this period your teacher may make general observations but will not give any specific advice. 4. 2. 2 How much teacher support can I expect? During your work for Controlled Assessment you must produce work/evidence independently but your teacher will be able to give you some advice, support, guidance and feedback but the amount will vary depending upon the type of task you are doing. You must make your own judgements and draw your own conclusions but your teacher will: 12  ©OCR 2009 Guide to Controlled Assessment in GCSE Applied Business ? ? Offer advice about how best to approach a task offer guidance on the way you work in groups so that you all have an opportunity to tackle your tasks offer advice to help your research, possibly arranging visits to place of interest, if this is appropriate monitor your progress to make sure your work gets underway in a planned and timely manner ensure that your work meets the Specification requirements keep a log of the feedback they give you supervise any practical work you do to ensure you receive advice about health and safety. ? ? ? ? ? The support given by your teacher will be to make sure you understand what it is you have to do. Your teacher will not be allowed to provide model responses for you or work through your responses or outcomes in detail. 4. 2. 3 What can I expect in the supervised sessions? This period should include some form of evaluation either in the written form, in a teacher interview or a presentation to the group. For the last two your teacher may record these sessions. This is particularly essential in group work where the teacher will be attempting to ascertain your individual contribution within the group. You should reference all sources used and any materials you have used in the whole piece whether in supervised or unsupervised sessions. Quotations should be clearly marked and referenced to ensure all intellectual property rights are maintained. It is unlikely that complete downloaded documents from the internet are suitable. Your teacher will sign an authentication form to complete the process. You may also be asked to sign the form.  © OCR 2009 Guide to Controlled Assessment in GCSE Applied Business 13 5 Teacher guidance on task marking 5. 1 Generic guidance on how to mark Controlled Assessment tasks The marking criteria detail the skills, knowledge and understanding which the candidate is required to demonstrate. The (mini) task should be marked by the teacher according to the given marking criteria using a ‘best fit’ approach. For each of the (mini) tasks, the assessor should select the descriptors, provided in the marking criteria, which most closely describe the quality of work being marked. Marking should be positive, rewarding achievement rather than penalising failure or omissions. The award of marks must be directly related to the marking criteria. Teachers use their professional judgement in selecting the descriptor which best describes the work of the candidate. To select the most appropriate mark within this descriptor, teachers should use the following guidance: ? where the candidate’s work convincingly meets the descriptor, the higher marks in the mark range should be awarded where the candidate’s work adequately meets the descriptor, the most appropriate mark in the middle range should be awarded where the candidate’s work just meets the descriptor, the lowest marks in the mark range should be awarded. ? ? The final mark for the candidate for each unit is out of a total of 60 and is found by totalling the marks for each of the (mini) tasks. 5. 2 Unpacking assessment objectives in Controlled Assessment tasks Assessment objectives (AOs) identify what the candidate has to do. They specify the context and use the ‘command words’ to indicate the level of the intellectual task, so, for example, the candidate may be directed to ‘identify’, ‘describe’ or ‘explain’. 14  © OCR 2009 Guide to Controlled Assessment in GCSE Applied Business Assessment objective 1 assesses candidates’ ability to recall, select and communicate their knowledge and understanding of concepts issues and  terminology; Assessment objective 2 assesses candidates’ ability to apply skills, knowledge and understanding in a variety of contexts and in planning and carrying out investigations and tasks; Assessment objective 3 assesses candidates’ ability to analyse and evaluate, make reasoned judgements and present conclusions. 5. 3 Interpretation of the Controlled Assessment marking criteria These general assessment objectives have been contextualised to the specific tasks in each Controlled Assessment (see the assessment grids below). So the teacher needs to: 1.identify the knowledge and skills the candidate will need to demonstrate if they have meet the AO 2. identify what the candidate has to do with this knowledge and/or skill; for example, should they be describing or explaining? Each assessment objective has been written at 3 levels, which increase in intellectual difficulty. The teacher will need to make a holistic judgement of which level (1, 2 or 3) best fits the candidate’s work. In general terms, a candidate who is able to produce some limited evidence for achieve Mark Band 1. A candidate who produces a range or evidence but significant gaps in coverage, knowledge and understanding, is likely to achieve candidate who has addresses most, or all of the issues needed to fully complete to achieve Mark Band 3. a task is likely to where there are Mark Band 2. A the tasks is likely For example, in Mark Band 1 a candidate might identify some relevant knowledge required to address the task but fails to adequately explain the issues. In Mark Band 2 a candidate might list a comprehensive range of issues and explore them all to the required standard but some explanations are incorrect or lacking application to the context. In Mark Band 3 a candidate is likely to identify an appropriate range of issues and analyse them all appropriately, in depth and within the required context. 5. 4 Authentication of Controlled Assessment outcomes Teachers must be confident that the work they mark is the candidate’s own. This does not mean that a candidate must be supervised throughout the completion of all work but the teacher/course tutor must exercise sufficient supervision, or introduce sufficient checks, to be in a position to judge the authenticity of the candidate’s work. Candidates must not plagiarise. Plagiarism is the submission of another’s work as one’s own and/or failure to acknowledge the source correctly. Plagiarism is considered to be malpractice and could lead to the candidate being disqualified. Plagiarism sometimes occurs innocently when candidates are unaware of the need to reference or acknowledge their sources. It is therefore  © OCR 2009 Guide to Controlled Assessment in GCSE Applied Business 15 important that centres ensure that candidates understand that the work they submit must be their own and that they understand the meaning of plagiarism and what penalties may be applied. Candidates may refer to research, quotations or evidence but they must list their sources. The rewards from acknowledging sources, and the credit they will gain from doing so, should be emphasised to candidates, as well as the potential risks of failing to acknowledge such material. The candidate must sign a declaration to this effect. Centres should reinforce this message to ensure that candidates understand what is expected of them. Please note: Centres must confirm to OCR that the evidence produced by the candidate is authentic. The Centre Authentication Form includes a declaration for assessors to sign. It is a requirement of the QCA Common Criteria for all Qualifications that proof of authentication is received. 5. 5 Internal Standardisation of Controlled Assessment It is important that all internal assessors, working in the same subject area, work to common standards. Centres must ensure that the internal standardisation of marks across assessors and teaching groups takes place using an appropriate procedure. This can be done in a number of ways. In the first year, reference material and OCR training meetings will provide a basis for centres’ own standardisation. In subsequent years, this, or centres’ own archive material, may be used. Centres are advised to hold preliminary meetings of staff involved to compare standards through cross-marking a small sample of work. After most marking has been completed, a further meeting at which work is exchanged and discussed will enable final adjustments to be made. 5. 6 Moderation of Controlled Assessment All work is marked by the teacher and internally standardised by the centre. Marks are then submitted to OCR, after which moderation takes place in accordance with OCR procedures: refer to the OCR website for submission dates of the marks to OCR. The purpose of moderation is to ensure that the standard of the award of marks for work is the same for each centre and that each teacher has applied the standards appropriately across the range of candidates within the centre. The sample of work which is presented to the Moderator for moderation must show how the marks have been awarded in relation to the marking criteria. Each candidate’s work should have a cover sheet attached to it with a summary of the marks awarded. If the work is to be submitted in digital format this cover sheet should also be submitted electronically within each of the candidate’s files. 5. 7 Minimum requirements for Controlled Assessment There should be clear evidence that work has been attempted and some work produced. If a candidate submits no work for an internally assessed component, then the candidate should be indicated as being absent from that component on the mark sheets submitted to OCR. If a candidate completes any work at all for an internally assessed component, then the work should be assessed according to the internal assessment objectives and marking instructions and the appropriate mark awarded, which may be zero. 16.  © OCR 2009 Guide to Controlled Assessment in GCSE Applied Business 5. 8 Submission date for Controlled Assessment Candidate’s marks must be despatched to the Moderator and to OCR. Please refer to the OCR website for details of submission dates relevant to the current series of examinations.  © OCR 2009 Guide to Controlled Assessment in GCSE Applied Business 17 6 FAQs What are the dates in which the Controlled Assessments can be taken? Controlled Assessment is a form of internal assessment and as such there isn’t a specified date in which Controlled Assessment has to be taken. It is up to the centre to decide when Controlled Assessment will be taken: guidance on this can be found in Section 5: Controlled Assessment of all revised GCSE Specifications (first teaching in September 2009). When can teachers and candidates access the material? Controlled Assessment tasks will be available from Interchange on 1 June of the year prior to an assessment series, i. e. 1 June 2009 for assessment in June 2010 series. Tasks may be reviewed and it is the responsibility of centres to make sure that candidates are submitting the correct task. Why are you not making hard copies available to centres? This is an internal assessment and centres are responsible for the resource of internal assessment. It would be impossible to despatch hard copies of the Controlled Assessment without vast amounts of provisional entry data. Can any preparation work be done out of the classroom? Yes. Controls are set at the level of tasks setting, task taking and task marking. Preparation work comes into the task taking level, under Research and Data Collection, which have a limited level of control i. e. work can be carried out without direct supervision. More guidance on this can be found can be found in Section 5: Controlled Assessment of all revised GCSE Specifications (first teaching in September 2009). Is there a minimum or maximum time that can be spent on the assessments? Suggested time limits vary per subject: there are suggested time limits given in Section 5: Controlled Assessment of all revised GCSE Specifications (first teaching in September 2009). Where can the Controlled materials be accessed and by whom? Controlled Assessment tasks and other documents are accessed via Interchange. Centre access to the Interchange Controlled Assessment area will be available to the registered Centre User (normally the Examinations Officer). However, the Centre User can set access permissions to others within their centre, eg HODs, subject leaders or subject teachers. How long is each assessment valid for i. e can we use last year’s one this year? 18  © OCR 2009 Guide to Controlled Assessment in GCSE Applied Business Tasks may be reviewed and it is the responsibility of centres to make sure that candidates are submitting the correct task. Where can the Mark Schemes be accessed? Mark Schemes are included in the specifications and can also be accessed from the OCR website: In addition, Mark Schemes are attached at the end of each Sample Assessment Material and also available from OCR Interchange. Do we have to take the Controlled Assessment under exam conditions/teacher supervision? Yes, but only for the write up , i. e. the last part of Controlled Assessment when candidates are producing the outcomes of their research – note that this can be over more than one supervised session. More guidance on this can be found in Section 5: Controlled Assessment of all revised GCSE Specifications (first teaching in September 2009). Are the Controlled Assessments the same as written examinations, can we re-sit? Yes, candidates can resit controlled assessed units but as with any other unit, candidates can only resit once. Also, the 40% terminal rule means that 40% of the assessment has to be taken in the examination series in which the qualification has to be awarded. Centres have the responsibility to ensure that the correct tasks are used for a controlled assessme.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.